Pick your deck board. Get the CAMO system that's right for you.
Redwood
Edge fastening is the best way to install redwood decking. CAMO Edge Screws fasten the board through its side, and the rake tip augers material out, reducing the potential for splitting and cracking. You can install 316 Stainless Steel Collated Edge Screws with the CAMO DRIVE or use hand drive Edge Screws with the MARKSMAN Pro® tool that creates 3/16 in. spacing. If you want a traditional face-fastened deck, use CAMO Premium Deck Screws.
Products used with this material
Install decking while standing up with the award-winning CAMO DRIVE™ that can fasten Collated Edge and Face screws and Clips.
See product >>
Collated Edge Screws for Wood and Composite
For exclusive use with the DRIVE tool, Collated Edge Screws secure pressure treated, cedar, redwood, uncapped composite, and PVC boards through the edge.
See product >>
MARKSMAN Pro® Tool
The MARKSMAN Pro® Tool clamps to the board and creates a 3/16 in. (5mm) gap while guiding two CAMO Edge deck screws into the side of the board.
See product >>
Edge Deck Screws
Pair the patented rake tip screws with a MARKSMAN tool to install a fastener-free surface easily and affordably.
See product >>
Any board, any joist, straighten warped boards, and lock-in rows of grooved boards and clips with the LEVER® board bending tool that sets in one turn.
See product >>
Premium Deck Screws
For a traditional look, use premium deck screws that draw the board tightly to the joist.
See product >>Build SMARTER, build faster.
CAMO products are easy to use, easy to learn, and usable on any deck—so you can get the job done and move on.
GET CAMO