May is Deck Safety Month—make sure your outdoor living space is ready for the season.

Did you know Spring cleaning isn’t just for the interior of your home? As the weather gets nicer and you start scheduling get-togethers and cookouts, it’s critical to do some Spring cleaning— and inspecting —of your outdoor living spaces to ensure they are ready for entertaining. Of course, we don’t just mean that the grill is in the optimal spot for cooking but that your deck is safe and secure for your friends and family.

The North American Deck & Railing Association (NADRA) takes deck safety seriously, and rightfully so, as they estimate that “over 30 million decks [in the US] are past their useful life and need to be replaced or repaired.” That’s why they stress the importance of checking your deck during May, National Deck Safety Month®.

There’s no better time as a homeowner to check your deck to make sure it’s structurally sound and as a builder (anchor link to section) to evaluate that you are building decks with safety front of mind.

For Homeowners: Check Your Deck

When you go out to clear off dirt and debris from your deck, it’s easy to look at the face of your deck boards, and if they aren’t splintered or cracked, assume your deck is good for the season. But deck issues are often underlying, so you’ll need to do more digging and prodding to ensure total deck safety. Luckily, you can use NADRA’s Check Your Deck® Consumer Checklist to help you evaluate any issues.

The checklist highlights key actions and things to look out for; 

• For example keep an eye open for rot in the structural parts of the deck, like the joists, posts, and ledger board. 
• You’ll also want to look closely at all the fasteners, tightening any that have come loose or replacing those that have corroded or rusted. 
• Additionally, pay special attention to the stability of railings and banisters to prevent any possibility of them failing. 
• Check your grill to ensure it and other heat sources are away from flammable items or surfaces. 
• If you have lighting, check your light fixtures, electrical outlets, and patio furniture to confirm they’re all in good condition. 
• Finally, take a look around and evaluate your environment: are tree limbs hanging over the deck that could fall, or is there a hornet’s nest you need to remove?

If any significant issues are present, NADRA recommends having a professional inspect and repair your deck; you can find inspectors and builders on NADRA.org.

Other items on the checklist pertain to the aesthetics and surroundings of your deck. We joked about the grill earlier, but you want to ensure it and other heat sources are away from flammable items or surfaces. Next, Finally, 

For Builders: Check Your Deck-Building Practices

As a deck builder, Deck Safety Month is an excellent time to review your crew’s practices to ensure you install to the highest standard so homeowners never have to worry about safety. Of course, brand affinity plays a significant role in the products you use, but it’s a good habit to take inventory of the products you’re using to ensure you’ve got the best ones for the job.

For instance, CAMO®, a 2024 Deck Safety Ambassador and brand that built its name on the deck top with innovative deck fastening systems, now offers code-compliant Structural Screws that deliver the same reliability and durability to the substructure and beyond. These Structural Screws are third-party tested and certified IRC and IBC code-compliant by DrJ engineering. These screws start fast, drive smoothly, and hold strong in every popular interior and exterior structural application and may be an excellent option for your crew to try this year.

When evaluating the fasteners you’re using, keep coatings in mind too. For example, CAMO’s Structural Screws are available in a proprietary PROTECH™ Ultra 4 four-layer coating that protects your connections against the harshest environmental elements. Each layer works together for optimum corrosion resistance, UV and environmental protection, and torque reduction for a high-performing, long-lasting screw. It’s the only screw coating on the market tested to ASTM G198 standard, which required 2X longer testing and 3X more samples than the industry standard. If you’re building in marine settings or near water, use hot-dip galvanized structural screws and 316 Stainless Steel fasteners for every other connection.

Before laying down deck boards, take the extra step to extend the deck’s life by using deck tape. CAMO offers Joist + Ledger Deck Tape that adds moisture defense to joists and ledger boards and its textured, non-skid surface provides an added level of safety during install.  The flexible butyl Deck Tape also delivers exceptional performance to protect your project from harsh elements like UV radiation and even extreme temperatures.

Finally, when it comes to fastening the decking, consider using fasteners that will preserve the life of the board so homeowners don’t have to deal with splitting and cracking. For square decking, use CAMO Edge screws that fasten the board through the edge, making a strong v-lock connection into the joist. Edge screws feature a patented rake tip that augers board material while being driven. That action makes space for the screw and prevents splitting and cracking without the need to pre-drill holes on most boards. For grooved boards, rely on CAMO Universal Deck Clips that are up to 88% stronger than competitors’ clips in reducing lateral movement and up to 50% stronger in uplift holding power, thanks to the stainless steel gusset that locks the boards down. A bonus of using CAMO fasteners? CAMO backs its fasteners with a warranty, so you and the homeowner will have invaluable peace of mind.

Don’t get the grilling and deck-building season underway before you take the time to check your deck and make sure you’re using the right products to help you build better.

There are a lot of structural screws on the market—see how CAMO’s structural screw line can help you build better.

As its name suggests, a structural screw is a fastener used in building an exterior or interior structure. CAMO structural screws are rigorously tested and are capable of doing some pretty heavy lifting and making critical connections in everything from house framing to deck building.

While there have been fastening solutions for these connections before, like lag screws and nails, innovation has led to various structural screw lines on the market that are code-compliant, perform well, and offer some more features and benefits than fasteners of the past. Let’s look at CAMO® structural screws to get a sense of what these screws can offer.

A Solution for Every Structure

Whether you’re working on an interior or exterior project, you can use a fastener from the full line of CAMO structural screws to get the job done. The line includes Framing screws, Multi-Purpose screws, Multi-Ply + Ledger screws, and Truss screws:

• Framing Screws are specifically designed and load-rated for interior and exterior framing applications and replace 8d, 10d, and 16d nails. They offer better holding power and stronger connections in wood-to-wood framing or deck blocking applications.
• Multi-Purpose Screws are a reliable option for various general construction projects and replace lag screws in deck posts, beams, and handrails. They are available in flat head and hex head and in 1/4″ and 5/16″ diameters for you to conquer any project.
• Multi-Ply + Ledger Screws hold strong and finish flush in multi-ply wood headers and beams, interior and exterior ledger boards, and general construction applications. They replace lag screws in general construction and traditional nailing patterns that don’t always draw the wood together.
• Truss Screws secure the truss and rafters to the top plate, stud to the top plate, and, thanks to their exterior coating, deck joists to beams. They are the ideal replacement for hurricane ties in general construction and decking applications. They are also easy to fasten at the right angle with the hands-free truss guide included in every pail.

Tested and Code-Compliant

Our complete line of CAMO structural screws has been independently tested, audited, and certified as IBC and IRC code-compliant by DrJ Engineering, an accredited certification body. Our screws have received technical evaluation reports (TER) from DrJ certifying code compliance for general screw properties and specific structural applications. They also feature our proprietary PROTECH™ Ultra 4 coating system that has been tested to meet or exceed ASTM G198, withstanding corrosion 2X longer than the industry standard—the only coating on the market to do so. Our hex head screws are also available in the standard hot-dip galvanized coating, which is excellent for coastal applications.

Intentionally Designed for Easy Use

Each type of CAMO structural screw was engineered to start fast, drive smooth, and hold strong with no pre-drilling required, saving you time on the job. They are sleek in their design compared to a beefy lag screw and are heat-treated to add strength. They all feature sharp points that start fast, a Type 17 slash point that reduces splitting, and an aggressive thread TPI and angle for increased holding power. Our Truss screw is fully threaded from head to tip for maximum holding power, while the rest of the screws feature a straight knurl that reduces torque for easy driving in their applications.

Speaking of easy driving, all you need to install CAMO structural screws is your cordless drill and the included driver bit. Be sure to set the drill to the low speed and turn up the torque to the highest setting to let the screw do the work, and you’ll be done before you know it.

So before you pick up another box of lag screws or nails for your next framing or structural project, consider investing in high-performing, code-compliant structural screws to help you build better.